Skip to main content
Back to Knowledge Center
Safety Awareness

Fire Safety 101: Basic Drills Every Guard Must Know

12 Feb 2024 6 min read

Security guards are frequently the first responders in a fire emergency — not the fire department, whose arrival takes time, and not facility management, who may not be on-site at the moment of the incident. This makes basic fire safety knowledge a core part of a guard's job, not a peripheral skill. Below are the fundamentals every guard should be trained on and be able to execute under pressure.

Recognizing Fire Hazards Before They Become Emergencies

Prevention starts with routine awareness during patrols:

  • Overloaded electrical sockets or exposed wiring
  • Flammable materials stored improperly or near heat sources
  • Blocked fire exits or corridors
  • Fire extinguishers that are missing, expired, or obstructed
  • Smoke detectors or alarm systems that appear disconnected or non-functional

A guard who notices and reports these issues during a routine patrol prevents incidents that a reactive-only approach would miss entirely.

Knowing the Facility's Fire Response Plan

Every site should have a documented fire evacuation plan, and every guard on that site should know it — not just the guard who was on duty when it was explained:

  • Location of all fire exits, not just the primary one
  • Assembly points where occupants should gather after evacuation
  • Location and type of fire extinguishers throughout the facility
  • Whether the building has a fire alarm system, sprinklers, or a fire hydrant system, and how to activate them

The Core Drill Sequence

A guard's actions in the first minutes of a fire have an outsized effect on outcomes. The basic sequence typically includes:

  • Raise the alarm immediately — activate the fire alarm system if available, and alert other on-site staff
  • Assess whether the fire is safe to contain — a small, contained fire (for example, in a waste bin) may be manageable with a nearby extinguisher; a fire that is spreading should not be approached
  • Begin evacuation procedures — direct occupants toward the nearest safe exit, not necessarily the closest door if that route is compromised
  • Call the fire department — this should happen in parallel with evacuation, not after
  • Guide occupants to the assembly point and take a headcount if the facility maintains occupancy records (particularly relevant for offices and residential buildings)
  • Prevent re-entry until the fire department or facility management confirms it's safe

Using a Fire Extinguisher Correctly

Guards should be trained on the PASS technique, a widely taught method for extinguisher use:

  • Pull the safety pin
  • Aim at the base of the fire, not the flames themselves
  • Squeeze the handle to release the extinguishing agent
  • Sweep side to side across the base of the fire

Guards should also know that different fire types (electrical, chemical, ordinary combustibles) may require different extinguisher types, and using the wrong one can worsen certain fires — particularly electrical fires, where water-based extinguishers should never be used.

Communication During an Emergency

Clear, calm communication matters as much as technical knowledge. Guards should be trained to:

  • Give clear, simple instructions to occupants rather than technical jargon
  • Avoid causing panic through their own tone and body language
  • Relay accurate information to arriving fire services — location of the fire, whether anyone is unaccounted for, and any known hazards (gas connections, chemical storage) in the area

Why Regular Drills Matter

Knowledge that isn't practiced tends to break down under real pressure. Facilities that conduct periodic fire drills — rather than relying on a one-time training session — see meaningfully better guard performance during actual incidents, simply because the response becomes closer to automatic rather than something guards have to consciously recall.

Conclusion

Fire safety training for guards isn't about turning them into firefighters — it's about ensuring the first few minutes of any fire incident are handled calmly, correctly, and without delay. That window, more than almost anything else, determines whether a fire remains a minor incident or becomes a serious one.